Valve Pullers

Products > Valve Pullers

<< Return

Valve Pullers

Valve pullers are an essential part in the removal of float valves from the float sub. Model G Pullers can also be used in removing and installing the seal retainer ring when changing out the valve seal.


The Model F valve (top) puller is designed to remove float valves from the top of the sub. Simply squeeze the forks together and press against the head of the valve plunger. Once the forks are engaged with the cage the valve can be pulled. Disengage by sliding the separator away from the valve and squeezing the forks together and the puller can be removed.

Model F (Top) Puller


The Model F Valve Puller makes easy work of removing stuck or tight float valves from the sub or drill collar. Simply engage the special catch into the bottom of the float valve, rotate 90, and then simply slide the bumper into the stop and the float valve is removed.

Note: when using the puller to remove a Model FC valve, special care must be taken when engaging the catch so that it does not make contact with the releasing key.

Model F (Bottom) Puller


The Model G Valve Puller is dual-purpose tool. In addition to removing tight or stuck float valves from subs or drill collars, it assists in removing and installing the seal-retaining ring when changing out the valve seal.

Model G Valve Puller

  *Please click on the links provided for sizes and valve puller part numbers



© Copyright 2017, Keystone Energy Tools LLC. All rights reserved.